1、 Pedestrians or passengers are prohibited on the conveyor belt, and it is strictly forbidden to pull the belt by hand when it slips to avoid accidents;

2、 Before using the conveyor, it is necessary to check whether each operating part, tape buckle, and bearing device are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to a proper degree before starting.

3、 The belt conveyor should be started with no load. Only after normal operation can the material be fed in. It is prohibited to feed before driving.

4、 When the tape deviates during operation, it should be stopped for adjustment and not forced to be used to avoid wear on the edges and increased load.

5、 When several conveyors are running in series, they should be started sequentially from the discharge end. Only after all are operating normally can the material be fed in.

6、 The working environment and the temperature of the delivered materials shall not exceed 50 ℃ and shall not be lower than -10 ℃. Do not transport materials containing acidic or alkaline oils and organic solvents.

7、 The conveyor motor must have good insulation. Do not pull or drag the cables of the mobile conveyor randomly. The electric motor should be reliably grounded.

8、 Before parking, it is necessary to stop feeding and wait for all the materials stored on the belt to be unloaded before parking.